Networking basics - CABLING LANS AND WANS

Various symbols are used to represent media types. Token Ring is represented by a circle. Fiber Distributed Data Interface (FDDI) is represented by two concentric circles and the Ethernet symbol is represented by a straight line. Serial connections are represented by a lightning bolt.
Each computer network can be built with many different media types. The function of media is to carry a flow of information through a LAN. Wireless LANs use the atmosphere, or space, as the medium. Other networking media confine network signals to a wire, cable, or fiber. Networking media are considered Layer 1, or physical layer, components of LANs.
Each media has advantages and disadvantages. Some of the advantage or disadvantage comparisons concern:
Cable length
Cost
Ease of installation
Susceptibility to interference
Coaxial cable, optical fiber, and even free space can carry network signals. However, the principal medium that will be studied is Category 5 unshielded twisted-pair cable (Cat 5 UTP) which includes the Cat 5e family of cables.
Many topologies support LANs, as well as many different physical media. Figure shows a subset of physical layer implementations that can be deployed to support Ethernet.
Ethernet is the most widely used LAN technology. Ethernet was first implemented by the Digital, Intel, and Xerox group, referred to as DIX. DIX created and implemented the first Ethernet LAN specification, which was used as the basis for the Institute of Electrical and Electronics Engineers (IEEE) 802.3 specification, released in 1980. Later, the IEEE extended 802.3 to three new committees known as 802.3u (Fast Ethernet), 802.3z (Gigabit Ethernet over Fiber), and 802.3ab (Gigabit Ethernet over UTP).

Từ khóa: cabling lans, Networking basics, mạng cơ bản, kỹ thuật mạng, công nghệ mạng, Cisco Networking